Engineered Audio Video
Home Theater and Lighting control Experts
  • Home
  • Shop
  • News
  • Contact Us
  • Cart
Your cart is empty. Go to Shop.
Salt Lake City's Home Theater design
March 13, 2017

Salt Lake City’s home theater design and install process

ryankogan Blog Home theater

Use this basic guide line when going through the Salt Lake City’s home theater design process to achieve the best experience.  Give me a call if you have any questions or need any direction. Here is a link to my website.

 

Room Design

Designing the correct room is the most important part of the Salt Lake City’s home theater process.  There are many calculators out there that will help with the process here is a simple one that will give you a good starting point.  I would then use more complicated processes to figure out the best seating positions and optimal size of screen.

 

Speaker Choices

I’ve  always advise my clients to use bookshelf speakers and multiply subwoofers.  I prefer to use bookshelf speakers over in-wall or floor standing  speakers because of their flexibility to angle them in the room, which is important when calibrating a home theater.  The front speakers will only be playing down to 80 hertz so there is no need for large floor standing speakers that are not flexible when it comes to placement.

 

Subwoofers

Whenever possible use at a minimum two subwoofers and preferably four.  This gives you the opportunity to activate some of the room modes which will give every seat in the theater a flat, smooth response.  The process of blending four subwoofers into a theater room is a complicated process and takes the right testing equipment and knowledge. The results are amazing if done correctly!

 

Calibration

Once you get everything else installed and sounding and looking good it’s time to fine tune the system.  This is done using optical testing devices along with professional microphones.  This process usually takes anywhere from eight to ten hours to dial in a Dolby Atmos theater.  I have attended numerous hours of training over the years so I can accomplish this process efficiently.  If you want the projector and speakers to disappear into a life like experience this step has to be done correctly.

 

If you’ll follow these basic Salt Lake City’s home theater design steps you will be able to get more enjoyment while watching  a movie or your favorite sporting event if you want any help you can find me here.

 

 

 

Home automation system design steps Why you should care about room acoustics or at least your wallet should.

Related Posts

Lighting Control Systems

Blog

Lighting control systems – Salt Lake City

Outdoor audio system

Blog

It’s finally time for some outdoor audio in Salt Lake City

Room acoustic failure

Blog

Why you should care about room acoustics or at least your wallet should.

Recent Posts

  • Prewiring your housePrewiring your house correctly.
  • Home Automation -Engineered Audio VideoDIY Home Automation Systems.
  • Lighting Control SystemsLighting control systems – Salt Lake City
  • Outdoor audio systemIt’s finally time for some outdoor audio in Salt Lake City
  • Room acoustic failureWhy you should care about room acoustics or at least your wallet should.

Latest Tweets

  • New project I have been working on in New York!! pic.twitter.com/KRedmOKLOe
    5 years ago
  • New LG OLED television, Sonos playbar with the Leon Tonecase! pic.twitter.com/65PJB4Th7g
    5 years ago
  • I added a video to a @YouTube playlist youtu.be/x41XVtx78pQ?a Golf Jim McLean The eight step swing
    5 years ago
→ Follow me
Engineered Audio Video
Copyright © 2017 Engineered Audio Video, All Rights Reserved